China Tianjin Mikim Technique Co., Ltd. company news

For small pet food plants and startups, the Single-Screw dog food pellet extruder machine is the most strategic choice due to its low CAPEX (initial investment) and minimal OPEX (operating costs). While twin-screw machines offer more flexibility for complex recipes, single-screw extruders provide ... Read More

Operating a Single-Screw dog food pellet maker machine involves a 4-step process: 1. Preparation: Grind ingredients to 60-80 mesh and adjust moisture to 18-22%. 2. Startup: Preheat the barrel to 120°C-140°C and begin feeding at 20% speed. 3. Production: Stabilize the feed rate and monitor pellet ... Read More

In commercial fish feed production, the service life of wear parts is measured in operating hours rather than months. High-quality nitrided screw segments (38CrMoAl) typically last between 2,000 and 4,000 hours, while bimetallic or tungsten carbide-coated screws can exceed 6,000 hours. Die plates ... Read More

The choice between a single and twin-screw extruder depends on your recipe's fat and protein levels. Use a single screw floating fish feed pellet machine for simple, high-starch (carp/tilapia) recipes with 8%) recipes like shrimp or salmon feed. Twin-screw technology uses positive displacement to ... Read More

To prevent clogging in a Twin screw fish feed extruder machine, operators must follow a strict Thermal and Material Transition Protocol. During startup, you must preheat the barrel until all zones reach 90% of target temperature and begin feeding with a "startup mix" (low protein, high moisture). ... Read More

To ensure the peak performance of a Twin screw floating fish feed pellet maker machine, operators must focus on four core wear parts: 1. Screws (inspect for flight thinning); 2. Barrel Liners (check for groove wear); 3. Die Plates (clear blockage daily); and 4. Cutter Blades (sharpen every 48-72 ... Read More

Frequent clogging and uneven pellets in a Twin screw floating fish feed pellet extruder machine are typically caused by improper moisture balance (target 22-28%), insufficient grinding fineness (materials should be 1/3 the size of the die hole), and unstable steam pressure. To fix a clog, immediatel... Read More

The Twin screw floating fish feed pellet maker machine is the only viable choice for specialized aquatic feeds like shrimp and crab feed because of its ability to manage low-starch, high-protein, and high-fat formulas without material slippage. Unlike single-screw machines, twin-screw technology ... Read More

Choosing the right Twin screw floating fish feed pellet making machine depends on three primary technical pillars: 1. Capacity Requirements ( kg/h ) based on a 10-15% future growth margin; 2. Formula Complexity, specifically your need to process high-fat (>8%) or high-protein (>40%) ingredients; and ... Read More

The core characteristics of a high-quality conditioner in a Twin screw fish feed making machine include SS304 stainless steel construction, adjustable paddle angles, and precise steam/liquid injection ports. Its primary performance metric is providing a residence time of 30 to 120 seconds, allowing ... Read More