China Tianjin Mikim Technique Co., Ltd. company news

Precise temperature and pressure control enhances nutrient conversion efficiency. The Twin Screw Pet Feed Extruder is equipped with an independent steam heating system and segmented temperature control devices. Compared to single-screw extruders that rely solely on frictional heating, it precisely ... Read More

Forced feeding structure improves conveying efficiency and breaks through capacity bottlenecks. The Twin Screw Pet Food Extruder uses two interlocking screws as the core conveying components. Compared to the gravity feeding mode of a single-screw extruder, it generates a forced pushing force through ... Read More

Problem 1: Raw material jamming, feeding interruption. This is the most common problem when loading small fish food making machines. The main causes include excessive moisture content (over 15%), uneven particle size, excessive impurities, or residual raw material adhering to the feed inlet and ... Read More

Feeding adaptation techniques for conventional raw materials. Conventional raw materials such as corn, soybean meal, and fishmeal, after pretreatment, have a moisture content of 12%-13%, a particle size of 80-100 mesh, good flowability, and strong compatibility for feeding. For manual feeding, a ... Read More

The standard operating procedure for the automatic feeding system must follow the steps of "system check - parameter preset - linkage start - dynamic monitoring" to ensure efficient coordination between feeding and the extruder: Step 1: System check. Before feeding, check whether the hopper, screw ... Read More

The standard operating procedure for manual loading must follow the principle of "no-load preheating - uniform feeding - dynamic adaptation" to ensure that the loading and operation of the small floating fish feed making machine are coordinated: First, no-load preheating: Start the extruder under no... Read More

Raw Material Pretreatment: A Core Step for Adapting to Fish Feed Production Equipment's Feeding Requirements. Before loading the extruder, the raw materials must meet three major standards: moisture content, particle size, and purity. Otherwise, loading efficiency and extrusion effect will be ... Read More

Differences in adaptability between aquaculture scenarios and fish species. Traditional feeds are mostly general-purpose powders, which cannot adapt to the different feeding habits and nutritional needs of various fish species: mid-to-upper-level fish (such as bass and tilapia) require floating feed... Read More

The core differences in aquaculture efficiency lie in growth rate and farming cycle. Traditional feeds have low nutrient absorption efficiency and poor palatability, resulting in slow growth and poor uniformity in fish after consumption, leading to a long farming cycle. For example, grass carp ... Read More

The core differences in microbial control lie in sterilization effectiveness and feed safety. Traditional feed processing is simple, lacking a dedicated sterilization step. Raw materials (such as soybean meal and fishmeal) are prone to the growth of harmful microorganisms like E. coli, Salmonella, ... Read More