China Tianjin Mikim Technique Co., Ltd. company news

Troubleshooting for "no pellet discharge" should be done in the following order: "Raw Material - Parameters - Components". First, check the raw materials: If the raw material moisture content is too high (>18%), it will cause the material to stick in the die orifice and fail to discharge smoothly. ... Read More

Troubleshooting should be conducted according to the principle of "segmented equipment location." First, check for blockages in the crusher: Open the feed inlet and observe. If the raw material accumulates above the screen, it's likely due to an excessively small screen aperture or wear and ... Read More

The primary selection principle is "product demand-oriented," determining the equipment type based on feed type and core performance indicators. For producing floating fish feed, high-fiber aquatic feed, and complete pet food, a wet extruder is essential, as its precise control of moisture and ... Read More

In terms of initial investment costs, wet extruders are significantly more expensive than dry extruders. A dry extruder with an hourly capacity of 1 ton costs approximately 150,000-250,000 yuan, primarily due to its simple structure and lack of need for steam and water addition systems. In contrast, ... Read More

The dry-type small fish feed pellet making machine operates on the core principle of "mechanical frictional heat generation." It requires no additional water or steam, relying entirely on the high-intensity extrusion and shearing action between the screw and barrel to generate heat, raising the raw ... Read More

The most obvious difference lies in physical properties, primarily reflected in three indicators: hardness, expansion rate, and water resistance. Regarding hardness, feed produced by dry extruders, due to its lower moisture content and denser structure, generally has a hardness 50%-80% higher than ... Read More

The core application scenario for dry fish feed production equipment is the production of "low-moisture, high-energy" feeds, especially suitable for pet snacks, sinking aquatic feeds, and specialty low-moisture feeds. In the pet food industry, when producing treats such as jerky and chew sticks, the ... Read More

Personalized Development Trends in Animal Extrusion Production Lines 1. Focusing on "High-End, Functional" Product Production Animal extrusion production lines (especially puffed products) are primarily suited for high-end aquaculture scenarios such as aquaculture, pets, and young animals. In the ... Read More

When buying fish, consumers prefer firm flesh and no muddy taste; when buying eggs, they prefer those with dark yolks and high nutritional value. These quality differences are actually closely related to feed – feed produced using small-scale equipment is nutritionally uneven and substandard in ... Read More

Previously, rural farming was mostly done by small-scale farmers, each raising a few dozen chickens and a few pigs, using a variety of feeds, resulting in inconsistent product quality and difficulty in fetching good prices. Now, more and more large-scale farms are emerging, raising tens of thousands ... Read More