China Tianjin Mikim Technique Co., Ltd. company news

The core differences in water stability lie in water resistance and waste rate. Traditional powdered feed dissolves and crumbles within seconds of being introduced into water, resulting in the loss of most nutrients and a waste rate as high as 20%-30%. Furthermore, the dissolved organic matter leads ... Read More

The core difference in nutrient conversion efficiency lies in starch gelatinization and protein denaturation. Traditional powdered feed has a starch gelatinization rate of only about 30%, and the protein is not denatured. After fish consume it, a large amount of nutrients cannot be broken down and ... Read More

Core safety operating procedures and key protection points. Strict adherence to operating procedures is essential to mitigate safety risks: First, pre-start inspection: Confirm that the equipment's protective cover, emergency stop button, and leakage protection device are intact. Clean up debris ... Read More

The core procedures and frequency for daily maintenance of a floating fish extruder machine are as follows: A standardized maintenance log should be established, and maintenance should be implemented according to the frequency: First, daily maintenance: After production, stop the machine to cool it ... Read More

Core Parameter Control: Adapting to Feed Type and Quality Requirements. Different machine models require different parameter control focuses. For floating fish feed machines, four key parameters need attention: First, screw speed, ranging from 250-400 rpm. High speeds (350-400 rpm) enhance shear ... Read More

The core standards for raw material pretreatment are moisture and particle size control. Raw material moisture content is crucial for pellet formation and puffing effect, and must be strictly controlled between 12% and 14%. Excessive moisture leads to loose pellets, sticking to the machine, material ... Read More

The core dimension for selecting a pet food processing machine model is adapting it to the type of feed and the needs of the fish. Different models cater to different feed characteristics and require targeted selection: Flat die pellet mills have a simple structure and low cost, suitable for ... Read More

Repair methods for gearbox oil leaks. Oil leaks in pet food processing machine gearboxes commonly occur in areas such as the gearbox cover gasket, output shaft oil seal, and drain plug. The repair process is as follows: Step 1: Stop the machine and allow it to cool down. Turn off the power and wait ... Read More

Emergency response procedures for oil leaks. Based on the severity and scope of the oil leak from the wet pet food processing machine, emergency response is divided into three levels: Level 1: Minor oil leaks (only localized oil stains, no feed contamination, no equipment malfunction). A "production... Read More

Targeted handling of different leaks in hydraulic systems. Leaks in the hydraulic system of a fish pellet making machine can be divided into fixed leaks (joints, valve assemblies) and moving leaks (hydraulic cylinders, hydraulic pumps), and the handling methods for each have different focuses: First... Read More