Components of the guillotine. Composed of guillotine mechanism, feeding mechanism, throwing mechanism, transmission mechanism, walking mechanism, protection device and frame and other parts of the straw guillotine machine, details are as follows. 1、Feeding mechanism: consisting of feeding table, ...

Straw crusher can guillotine and crush all kinds of crop straw, corn straw, cotton straw, bean oranges, rice husk, peanut shells, groundnut seedlings, cereal straw, wheat straw and other forage as well as all kinds of granular grain. The machine has the characteristics of guillotine, crushing, green ...

Operation and use. 1、To stop and change the long and short grass, change the position of the angle belt in the tower wheel groove to change the cut long grass or short grass. 2、Before working, open the variable speed guard, add the right amount of dry oil on the gear to reduce the gear wear, if too ...

Small guillotine is mainly used for guillotine cutting green, dry corn stalks, rice straw, etc. It can also be used for guillotine cutting various kinds of forage, which is an ideal machine for family farming. I. Structure Introduction. The machine consists of the following institutions. 1、Feeding ...

Guillotine is a kind of animal husbandry machinery and equipment used for guillotining wheat straw, corn straw and all kinds of grass (such as grass, hay, rice straw, wild grass, grain grass, etc.) of various crops and pasture. It is mainly composed of frame, walking mechanism, protection device. ...

Basic operation 1、Clear the hard objects such as wood sticks, iron, stones, etc. that are entrapped in the material when feeding. 2、According to the length of the material you need, install and debug the gears. 3、Turn on the power source, make the machine idle for a few minutes, there is no ...

Guillotine crusher is a cut off with the crushing of one machine, a one-time corn stalks, rice straw, wheat straw, sweet potato stalks, peanut loam, reed grass, sorghum stalks and other crop straw crushed into the end; this guillotine crusher finished material according to the size of the sieve ...

(1) guillotine operation, safety protection equipment must be complete. (2) operators to fully understand the performance of the machine, strictly prohibited after drinking, sick or overly fatigued when the machine is operating, people and things must not be close to the operating parts of the work. ...

Guillotine repair and maintenance 1, often check whether the fasteners are loose, and tighten. 2、Strengthen the maintenance of the bearing seat, coupling joint, transmission box, regularly refill or replace the lubricant, grease. 3, the cutting gap adjustable guillotine price, according to the ...