Components of the guillotine.
Composed of guillotine mechanism, feeding mechanism, throwing mechanism, transmission mechanism, walking mechanism, protection device and frame and other parts of the straw guillotine machine, details are as follows.
1、Feeding mechanism: consisting of feeding table, upper and lower Cao Kun, fixed blade, fixed blade support seat
2, guillotine throwing mechanism: by the dynamic knife, knife plate, locking screws and other components
3, transmission mechanism: by the triangle belt, drive shaft, gears, universal joint, etc.
4、Walking mechanism: composed of ground casters
5、Protection device: composed of protective cover
Guillotine working mode.
Guillotine machine with motor as the supporting power source. When the material to be processed enters between the upper and lower pressure grass kun, it is clamped by the pressure groove and sent to the guillotine mechanism at a certain speed, and then thrown out of the machine through the grass outlet after being shredded by the high-speed rotating knife.
Large guillotine machine product details.
The large straw guillotine machine is tailor-made for large farms. It can be used to guillotine various dry and green corn stalks, wheat straw, rice straw, alfalfa, tobacco, peanut and sweet potato seedlings, cotton straw, wattle, twigs and bark and other kinds of crop stalks and forage herbs. It is used as grass cutting feed processing for cattle, sheep, deer, horses, donkeys and mules, with high guillotine quality and uniform length. It can guillotine 30 tons of forage per hour. One machine working for one hour can meet the feed feeding needs of large farms for one day.
Working principle of straw guillotine.
The motor is used as the power source of the straw guillotine. It transmits the power to the main shaft, and the gear at the other end transmits the speed-regulated power to the grass press through the gear box and universal joint, etc. When the material to be processed enters between the upper and lower grass presses and is sent to the guillotine mechanism at a certain speed, it is chopped by the high-speed rotating knives and then thrown out of the machine through the grass outlet. It is possible to use manual feeding, and then the machine automatically feeds, in order to save labor and cost.
1 The bottom is designed with rollers, which is convenient to move.
2 It is equipped with a safety device to prevent knife gnawing accident, and the whole machine is safe and reliable.
3 The drive shaft of the grass roller is made of universal coupling, which has a tight structure, flexible operation and convenient disassembly and installation.
4 There are many choices of matching power, such as electric motor, diesel engine, tractor, etc., which is especially suitable for areas lacking in electricity.
5 The blade is made of fine steel, refined by a special process, wear-resistant; the use of high-strength bolts, the use of safe and reliable.
6 thickened steel plate continuous welding of the housing, the overall mold forming, beautiful and durable.
Contact Person: Fiona
Tel: 86 19913726068