Why doesn't the feed pellet machine produce any material?
This new type of machine, feed pellet production line equipment, can easily press pellets out of the die holes through the extrusion of the roller.
Advantages of feed pellet production line equipment
The biggest advantage of feed pellet production line equipment is that it can flexibly adjust the length of the pellets to meet different needs. In addition, the machine has a compact structure, small footprint, and low operating noise, making the operation simple and easy to understand, even first-time users can quickly get started.
Causes and solutions for non-discharging
The feed pellet machine may encounter the problem of non-discharging during use, which may be caused by a variety of reasons. In order to help users better solve this problem, we have listed the following possible reasons and corresponding solutions:
Model
Capacity
Dimension
Weight
MK-125
80-100kg/h
110*35*70 cm
95 kg
MK-150
120-150kg/h
115*35*80cm
100 kg
MK-210
200-300kg/h
115*45*95cm
300 kg
MK-260
500-600kg/h
138*46*100cm
350 kg
MK-300
700-800kg/h
130*53*105cm
600 kg
MK-360
900-1000kg/h
160*67*150cm
800 kg
MK-400
1200-1500kg/h
160*68*145cm
1200 kg
1.Used for making animal feed pellets
2.Used for making wood pellets as fuel
3.Raw material size need 3-5mm ; Humidity :10-12%
△ Blockage problem
The feed inlet or agitator of the feed pellet machine is blocked and needs to be cleaned in time to ensure smooth flow.
△ Raw material problem
The die hole of the pellet machine is blocked and measures need to be taken to open it to restore the discharging function.
If the moisture content of the raw material is too high or too low, it will affect the formation of the pellets and need to be adjusted to an appropriate range.
Grinding disc and roller problem
The improper gap between the grinding disc and the roller of the feed pellet machine, unreasonable matching or severe wear will lead to non-discharging of pellets, which need to be checked and adjusted.
△ Long-term non-use problem
For feed pellet machines that have not been used for a long time, the grinding disc and roller may be affected by rust and affect the pelleting, and regular maintenance is required.
△ New machine problem
The new machine does not use sufficient lubricating oil during the run-in, or the run-in is insufficient, resulting in rough, uneven or non-vertical apertures, which affects the pelleting. It is necessary to re-run and check the aperture.
△ Grinding degree problem
The material is not fully crushed, the particles are too large, and the pellets cannot be pelletized by the pellet machine. It is necessary to ensure that the material is crushed to the appropriate size.
△ Voltage problem
Check whether the voltage is stable. Voltage fluctuations may affect the normal operation of the pellet machine.
△ Operation problem
The operator needs to be familiar with the performance and operation methods of the feed pellet machine to avoid the phenomenon of no pellets due to improper operation.