A feed production line is the best choice for livestock farms. It allows for customized feed pellet production, and its high degree of automation effectively reduces labor costs. Long-term equipment use requires maintenance, so let's briefly analyze the feed production line.
Production process introduction
Hammer Mill
Feed grinder is a special equipment used to process crop straw, grain, soybean meal and other raw materials into powdered feed. It belongs to the category of crushing machinery and is mainly used in feed processing, biomass energy and straw comprehensive utilization.
Screw Conveyor
Used for conveying grain and powdery raw materials, sealed structure, reliable, clean, hygienic, no residue.
Stainless Steel Mixer
Stainless steel mixer is suitable for mixing powdered raw materials, with high efficiency and fast mixing speed, suitable for small-scale feed.
Feed Pellet Machine
Feed pellet machines are widely used in large, medium and small livestock and poultry farming. They can produce feed pellets of various specifications with simple structure, wide adaptability, small footprint and low noise.
Belt Conveyor
Used for conveying finished raw materials and feed pellets. Simple structure, good sealing performance. Easy installation and maintenance. Flexible process layout. Smooth guide rails, high molecular polyethylene scraper with self-cleaning function. Low noise, good guidance, no residual material.
cooler
Feed cooler is a cooling equipment that adopts the countercurrent cooling principle. The particles are cooled fully and evenly. It runs smoothly and discharges smoothly.
Electronic scales
Weigh the feed accurately to facilitate subsequent packaging.
| Capacity |
15-20t/h |
| Range of application |
large commerical feed factory,could make chicken,sheep,cow,shrimp feed |
| Workers requirments |
4-5 people |
| Shipment requirments |
6*40ft container |
| Product advantages |
Fully automatic intelligent batching, computer control system with stable output, efficient and continuous operation, labor saving, direct packaging, particle size can be selected from 1-12mm. |
| size for whole line |
According to land size and layout |
Finished product display
Regular maintenance involves systematic inspection and maintenance of equipment, typically categorized as weekly, monthly, and annual.
1. Weekly Maintenance
During weekly downtime, the equipment should be inspected, including:
- Check the tightness of drive belts and chains, and adjust or replace if necessary.
- Clean easily clogged components, such as filters and screens, to ensure ventilation and filtration effectiveness.
- Check electrical wiring for aging or damage to avoid safety hazards.
2. Monthly Maintenance
More in-depth maintenance is required monthly:
- Disassemble and clean the hammers and screens of the crusher, inspect for wear, and replace severely worn parts promptly.
- Inspect the mixer's impellers and linings to ensure they are free of deformation or excessive wear.
- Clean the pelletizer's rollers and ring die, and check the roller bearings for oil depletion.
3. Annual Maintenance
- Check the operating condition of power components, such as the motor and reducer, and replace lubricants if necessary.
- Perform anti-corrosion treatment on the entire equipment, especially metal parts exposed to moisture. -Calibrate sensors, instruments and other control components to ensure data accuracy.
For more information on process design, equipment layout, plant construction plan, single machine equipment quotation, turnkey quotation, etc., please feel free to contact us.
Qualifications and Honors
Your message must be between 20-3,000 characters!