2 Tons Per Hour Complete Turnkey Poultry Feed Mill for Pakistan
| Capacity: | 2000 Kg/hour | Pellet Diameter: | 2-12 Mm |
| Material Compatibility: | Corn, Soybean, Wheat, Barley, Grass, Feed Materials | Applicable Industries: | Manufacturing Plant, Farms, Home Use |
| Material Of Die And Roller: | Alloy Steel | Conditioner: | Single Or Double Conditioner |
| High Light: | turnkey poultry feed mill,2 tons per hour feed mill,poultry feed pellet machine |
||
A 2 tons per hour turnkey poultry feed mill for Pakistan is ten machines across eight stages: hammer mill, batching section, double shaft mixer, ring die pellet mill with feeder and conditioner, counter flow cooler, crumbler, screener and automatic bagger, joined by elevators and screw conveyors. Core load is 99.2 kW and the press block alone is 40.7 kW. It takes whole maize and soybean meal at one end and delivers 2 tonnes of bagged poultry feed per hour at the other. Manufacture takes 30-35 days and the mill ships in two 40 ft containers.
- What Does a 2 TPH Turnkey Poultry Feed Mill Include?
- Which Raw Materials Does a Poultry Feed Mill Grind?
- Which Machines Make Up a 2 TPH Poultry Feed Mill?
- How Does a Poultry Feed Line Move From Silo to Bag?
- What Are the Key Features of the Ring Die Pellet Mill?
- Which Ring Die Fits Which Poultry Feed?
- Which Birds Does the Poultry Feed Production Line Serve?
- How Much Power Does a 2 TPH Poultry Feed Mill Draw?
- How Much Floor Space Does a Poultry Feed Mill Plant Take?
- What Service Comes With a Poultry Feed Mill?
- How Is a Poultry Feed Mill Installed in Pakistan?
- What Does a Turnkey Poultry Feed Mill Quotation Cover?
Ten machines on the list, wired and interlocked as one line.
| No. | Photo | Unit | Model | Power | Capacity | Duty |
|---|---|---|---|---|---|---|
| 1 | ![]() |
Water drop hammer mill | SFSP56X36 | 22 kW | 3-4 t/h | Grinds maize and meals |
| 2 | ![]() |
Ingredient bins and weighing hopper | By formula | Counted per bin | One batch per mix | Weighs each ingredient |
| 3 | ![]() |
Double shaft paddle mixer | SSHJ-2.0 | 18.5 kW | 1000 kg per batch | Blends meal, protein and minerals |
| 4 | ![]() |
Ring die feed pellet mill | SZLH-304 | 37 kW | 2-2.5 t/h | Presses the mash into pellets |
| 5 | Pellet mill feeder | On SZLH-304 | 1.5 kW | Variable | Feeds the die at a steady rate | |
| 6 | Conditioner | On SZLH-304 | 2.2 kW | Steam or water | Conditions mash before the die | |
| 7 | ![]() |
Counter flow cooler | SKLN11x11 | 1.5 kW | 1-2 t/h | Cools pellets to bagging temperature |
| 8 | ![]() |
Automatic bagger | DCS-Z-W-50 | 4.5 kW | 200-300 bags/h | Weighs, fills and closes bags |
| 9 | Bucket elevators and screw conveyors | TDSG10-16, KWX75YP | 10.5 kW | To layout | Vertical and horizontal transfer |
The hammer mill is the only machine deliberately bought above the line rate. Each chicken feed manufacturing machine on the list is wired into one panel, so the line starts and stops as a unit rather than stage by stage. A 2 t/h press fed by a 2 t/h mill stops every time a screen wears, so the mill comes from the 3-4 t/h row and runs at part load.
Maize, wheat, soybean meal, bran, oil cakes, limestone, minerals and premix, with a different route through the plant for each.
| Raw Material | Incoming Form | Grinding | Batching | Pelleting |
|---|---|---|---|---|
| Maize | Whole grain, 13-14 percent | Yes, 1.5-3 mm screen | Yes | Yes |
| Wheat and broken rice | Whole grain | Yes | Yes | Yes |
| Wheat bran and rice bran | Loose meal | Optional | Yes | Yes |
| Soybean meal | Loose meal | No | Yes | Yes |
| Sunflower and cottonseed cake | Pressed cake | Yes, coarse screen | Yes | Yes |
| Fish meal | Meal | No | Yes | Yes, low inclusion |
| Limestone and calcium grit | Granular | Yes, to 1 mm | Yes | Yes |
| Mineral premix and additives | Fine powder | No | Yes, small bin | Yes |
| Vegetable oil | Liquid | - | - | Added at the mixer or coater |
Limestone is the ingredient that separates a layer mill from a broiler mill. A layer formula carries 8-10 percent calcium grit, which is abrasive on the die and on the hammers, and it is added at the batching stage rather than being ground to flour. A broiler formula carries almost none, which is why the same press runs longer between die changes on broiler feed.
Each stage is a series, and the choice inside a stage is what sets how much reserve the line carries.
| Model | Rotor | Speed | Power | Capacity | Size |
|---|---|---|---|---|---|
| SFSP56X30 | 560 mm | 2950 rpm | 11 kW | 1-2 t/h | 1400 x 860 x 1000 mm |
| SFSP56X36 | 560 mm | 2950 rpm | 22 kW | 3-4 t/h | 1430 x 860 x 1000 mm |
| SFSP56X40 | 560 mm | 2950 rpm | 37 kW | 5-6 t/h | 1630 x 860 x 1000 mm |
| SFSP65X45 | 650 mm | 2950 rpm | 45 kW | 7-8 t/h | 1720 x 870 x 1320 mm |
| SFSP65X60 | 650 mm | 2950 rpm | 55 kW | 10-12 t/h | 2000 x 960 x 1320 mm |
| Model | Batch | Power |
|---|---|---|
| SSHJ-0.5 | 250 kg | 5.5 kW |
| SSHJ-1.0 | 500 kg | 11 kW |
| SSHJ-2.0 | 1000 kg | 18.5 kW |
| SSHJ-4.0 | 2000 kg | 30 kW |
| Model | Main Motor | Capacity | Feeder | Conditioner | Pellet Diameter |
|---|---|---|---|---|---|
| SZLH-250 | 22 kW | 1-2 t/h | 0.55 kW | 1.5 kW | 1.0-12.0 mm |
| SZLH-304 | 37 kW | 2-2.5 t/h | 1.5 kW | 2.2 kW | 1.0-12.0 mm |
| SZLH-320 | 37 kW | 3-5 t/h | 1.5 kW | 3.0 kW | 1.0-12.0 mm |
| SZLH-350 | 55 kW | 5-8 t/h | 2.2 kW | 7.5 kW | 1.0-12.0 mm |
| SZLH-420 | 110 kW | 8-12 t/h | 2.2 kW | 11 kW | 1.0-12.0 mm |
| Unit | Models | Power Range | Capacity Range |
|---|---|---|---|
| Counter flow cooler | SKLN11x11 to 24x24 | 1.5-2.2 kW | 1-20 t/h |
| Crumbler | LG-15x80 to 25x170 | 1.5 kW drive | 1-25 t/h |
| Automatic bagger | DCS-Z-W-50 | 4.5 kW | 200-300 bags/h |
The mixer is the stage most often undersized. At 2 t/h the line needs two 1000 kg batches an hour, which leaves about twenty minutes per batch for filling, mixing, discharge and cleanout. A 500 kg mixer would need four cycles in the same hour and the press would idle between them.
Vertically by bucket elevator, horizontally by screw conveyor, and by gravity wherever the layout allows, because a fall costs nothing to run.
The sequence runs: intake pit and pre-clean, hammer mill, batching bins, mixer, press feeder, conditioner, ring die, cooler, crumbler, screener, finished feed bin, bagger. A poultry feed pellet production line runs that sequence continuously, with the press holding a steady load while batching fills and empties behind it.
Two points decide the building height. A poultry feed mill plant layout at this size is fixed by those two elevator heights before any machine is placed. The elevator that lifts ground material to the batching bins sets the top of the batching floor, and the elevator that lifts pellets to the cooler sets the top of the press floor. That is why a 2 tph poultry feed mill is built on two levels rather than spread over one slab.
Gravity also decides where the fines return. Screening after crumbling produces fines that go back to the press, and that return line is short if the screener sits directly above the press floor.
Six features do the work at this tonnage: a vertical ring, rollers running inside it, a variable speed feeder, a separate conditioner, automatic lubrication, and a die whose compression ratio sets the pellet density.
| Feature | What It Does | Why It Matters at 2 t/h |
|---|---|---|
| Vertical ring die | Material is pressed outward through the ring | Load spreads around the full circumference, so the die wears evenly |
| Rollers inside the ring | Two or three rollers sweep the die face | A steady 2 t/h without a worn patch on one side |
| Variable frequency feeder | Trims material into the press | The press is set to the die, not the mill |
| Separate conditioner motor | Steam and water added before the die | Pellet durability rises and press load falls |
| Automatic lubrication | Greases rollers, main shaft, gearbox and bearings | No daily greasing round, which is what kills presses on a two shift mill |
| Replaceable ring die | Compression ratio sets density | Pellet hardness is a die choice, not a motor choice |
Compression ratio is the number most buyers never ask about and should. It is the length of the die hole against its diameter, and a longer hole makes a denser pellet and draws more power. A layer pellet at 4 mm usually runs a longer ratio than a broiler pellet at the same diameter, because a layer ration with limestone in it needs more pressure to knit.
One die per diameter, and the crumbler is what turns a pellet into starter feed without a second die.
| Die | Diameter | What It Makes | Change Time |
|---|---|---|---|
| Starter die | 2.0-2.5 mm | Chick starter, crumbled | 2-4 hours with a hoist |
| Grower die | 3.0-3.5 mm | Grower and pullet pellets | 2-4 hours with a hoist |
| Layer die | 3.5-4.5 mm | Layer pellets | 2-4 hours with a hoist |
| Finisher die | 4.0-5.0 mm | Broiler finisher | 2-4 hours with a hoist |
| Cattle die | 6.0-8.0 mm | Ruminant pellets | 2-4 hours with a hoist |
A ring die is heavier than a flat die and it is removed with a hoist, so a mill selling five products keeps five dies and runs them in campaigns rather than changing mid-shift. A 2 t/h mill with a 4 mm die can run a week of layer feed before it needs the 3 mm die for a pullet order.
Broiler, layer, pullet and duck, from crumble to finisher pellet, on one press.
| Bird Stage | Feed Form | Diameter | Daily Feed per Bird |
|---|---|---|---|
| Broiler, day 1 to 14 | Crumble | 2.0-2.5 mm | 25-60 g |
| Broiler, day 15 to 28 | Pellet | 3.0-3.5 mm | 90 |