Small-Scale Livestock and Poultry Equipment for a Farm
| Advantage: | High Efficiency | Application: | Manufacturing Poultry Feed Pellets For Chickens, Ducks, Turkeys, Etc. |
| Spare Parts: | Flat Die+ Rollers | Applicable Industries: | Manufacturing Plant, Farms, Home Use |
| Production: | 1-100 Tons | Warranty: | 1 Year |
| Keyword: | Cattle Feed Pelletizer Machine | ||
| High Light: | poultry feed pellet machine,small-scale livestock feed equipment,farm poultry pellet maker |
||
Small-scale livestock and poultry equipment for a farm is three machines and two accessories: a hammer mill, a batch mixer and an optional flat die pellet mill, plus feed hoppers and a bagging stand. The working set is a 3 kW hammer mill at 120–250 kg/h, a 3 kW mixer, and a 15 kW flat die press at 100–200 kg/h on a 4–6 mm die. Connected load is 21 kW without the press and 36 kW with it. Manufacturing takes 20–25 days, and the whole set ships in one 20 ft container.
- What Machines Make Up a Small Feed Mill Plant?
- Which Raw Materials Does a Small Feed Mill Plant Grind?
- Which Animals Does the Small-Scale Poultry Equipment Serve?
- Which Dies Fit Which Poultry Feed?
- What Are the Key Features of the Flat Die Pellet Mill?
- How Much Power Does the Small Feed Mill Plant Draw?
- How Much Floor Space Does the Small Feed Mill Plant Need?
- What Service Comes With the Small-Scale Poultry Equipment?
- What Installation Does a Small Feed Mill Plant Need?
- How Is the Small Feed Mill Plant Shipped to Kenya?
- What Does a Small Feed Mill Plant Quotation Cover?
Four machines in the working set, and each one is chosen from a series rather than bought as a single fixed model.
| No. | Machine | Model | Power | Capacity | Weight | Duty |
|---|---|---|---|---|---|---|
| 1 | Hammer mill | HM-198B | 3 kW | 120–250 kg/h | 120–135 kg | Grinds maize and grains to meal |
| 2 | Batch mixer | KW-250 | 3 kW | 2000 kg/h | On frame | Blends meal with protein and minerals |
| 3 | Flat die pellet mill | RKL-250 | 15 kW | 100–200 kg/h | 0.5 t | Presses meal into 4–6 mm pellets |
| 4 | Bagging stand | Manual | – | 25–30 bags/h | – | Weighs and closes 25–50 kg bags |
| 5 | Feed hoppers | By layout | – | – | – | Buffers between mill, mixer and press |
Table 1: The working set for a farm mixing 250 kg a day. The press is optional and can be added later against the same layout.
Every machine on this list is a series entry. The hammer mill comes in six power steps, the mixer in three types, and the press in six sizes, so the same layout grows from 120 kg/h to 600 kg/h without rebuilding the shed.
| Model | Power | Capacity | Weight | Packing Size |
|---|---|---|---|---|
| HM-158B | 1.5 kW | 60–120 kg/h | 75–85 kg | 750 x 450 x 730 mm |
| HM-198B | 3 kW | 120–250 kg/h | 120–135 kg | 1000 x 750 x 1120 mm |
| HM-420B | 7.5 kW | 250–500 kg/h | 250–270 kg | 1200 x 1000 x 1220 mm |
| HM-420B | 11 kW | 250–700 kg/h | 300–320 kg | 1200 x 1000 x 1220 mm |
| HM-500B-28B | 11 kW | 400–800 kg/h | 470–500 kg | 1500 x 650 x 560 mm |
| HM-500B-28B | 15 kW | 400–1000 kg/h | 500–530 kg | 1100 x 930 x 980 mm |
| HM-50B-40B | 22 kW | 800–1000 kg/h | 710–755 kg | 1900 x 1100 x 1270 mm |
| HM-50B-40B | 30 kW | 800–1300 kg/h | 805–850 kg | 2200 x 1100 x 1270 mm |
Table 2: The hammer mill range. Two models share a frame at different motor ratings, which is why the weight moves with the power.
| Type | Model | Power | Capacity | Size |
|---|---|---|---|---|
| Vertical mixer | KW-500 | 3 kW | 1000 kg/h | 1930 x 600 x 1100 mm |
| Vertical mixer | KW-1000 | 4 kW | 1000 kg/h | 2309 x 836 x 1200 mm |
| Horizontal mixer | KW-250 | 3 kW | 2000 kg/h | 2309 x 836 x 1200 mm |
| Horizontal mixer | KW-500 | 7.5 kW | 3000 kg/h | 2974 x 910 x 1400 mm |
| Horizontal mixer | KW-1000 | 11 kW | 4000 kg/h | 3480 x 1260 x 1800 mm |
| U type ribbon mixer | LX-HY0.3 | 2.2 kW | 150 kg per batch | 2.8 x 0.85 x 1.8 m |
Table 3: The mixer range by type. The vertical mixer accepts a self-suction mill on top; the horizontal and ribbon types are batch machines.
| Model | Power | Capacity | Pellet Diameter | Weight | Size |
|---|---|---|---|---|---|
| RKL-250 | 15 kW | 100–200 kg/h | 4–6 mm | 0.5 t | 1400 x 600 x 1000 mm |
| RKL-300 | 22 kW | 150–250 kg/h | 4–6 mm | 0.65 t | 1780 x 670 x 1000 mm |
| RKL-350 | 30 kW | 100–300 kg/h | 4–8 mm | 0.76 t | 1860 x 700 x 1600 mm |
| RKL-400 | 37 kW | 300–600 kg/h | 4.5–10 mm | 2.2 t | 1900 x 850 x 1750 mm |
Table 4: The flat die range for a farm. The 250 row suits a farm pelleting 100–200 kg/h and the 400 row suits a commercial feed mill.
Maize and other grains, protein meals, minerals, and on the press side, any dry fibrous material that can be reduced to meal.
| Raw Material | Form Going In | Mill | Mixer | Press |
|---|---|---|---|---|
| Maize, sorghum, millet | Whole grain, 13–15% moisture | Yes, ground to 2–3 mm | Yes | Yes, after grinding |
| Wheat and rice bran | Loose meal | Optional, no grinding needed | Yes | Yes |
| Soybean meal | Loose meal | No | Yes | Yes |
| Sunflower and cottonseed cake | Pressed cake, needs breaking | Yes, coarse screen | Yes | Yes |
| Limestone and mineral premix | Powder | No | Yes | Yes |
| Fish meal | Meal | No | Yes | Yes |
| Cassava chips | Dried chips | Yes | Yes | Yes, at low inclusion |
| Roughage for cattle | Straw and stover | Yes, coarse screen | Yes | No |
Table 5: What each stage does with each material. The press column is what decides whether a farm can use one line for both poultry and cattle feed.
The one combination that does not work is whole grain straight into the press. A flat die press compresses meal, so anything the mill has not reduced to 2–3 mm will bridge above the die and stop the rollers. A farm that wants pellets buys the mill first and the press second for that reason.
Cassava is the material worth a note. It grinds well and presses well at a low inclusion, and above about a fifth of the mix the pellet goes soft because cassava starch gelatinises differently from grain starch. That is a formula limit rather than a machine limit.
Poultry, ducks, turkeys, and with a die change, cattle, goats and rabbits on the same set.
| Animal | Feed Form | Pellet or Crumble Diameter | Mash |
|---|---|---|---|
| Broiler, day old to week 2 | Crumble | 2.0–2.5 mm | Yes, fine |
| Broiler, grower and finisher | Pellet | 3.0–4.5 mm | Yes |
| Layer, pullet and hen | Pellet or mash | 3.5–4.5 mm | Yes, most common |
| Duck | Pellet | 3.0–4.0 mm | Yes |
| Turkey | Pellet | 4.0–5.0 mm | Yes |
| Cattle and goats | Pellet or mash | 6.0–8.0 mm | Yes |
| Rabbits | Pellet | 3.0–4.0 mm | No |
Table 6: What the set produces for each animal. Diameter is set by the die and length by the cutter.
A farm running poultry and ducks on the same mixer changes the die rather than the machine.
A poultry and animal feed production line for a mixed farm adds a second bagging head rather than a second mixer. The 3 mm die covers grower and duck feed, the 4 mm covers layer and turkey, and the crumbler turns a 3 mm pellet into broiler starter.
A chicken feed production machine at this scale changes output with the die rather than with the motor, which is why the die list matters more than the nameplate.
| Die | Pellet Diameter | What It Makes | Change Time |
|---|---|---|---|
| Starter die | 2.5–3.0 mm | Broiler starter, crumbled | About 30 minutes |
| Grower die | 3.5–4.0 mm | Grower and layer pellets | About 30 minutes |
| Finisher die | 4.5–5.0 mm | Broiler finisher, turkey | About 30 minutes |
| Cattle die | 6.0–8.0 mm | Ruminant pellets | About 30 minutes |
Table 7: Die selection for a flat die press. The 4–6 mm row in the machine table is the die range the press is built around, not a single die.
A farm supplying three bird ages keeps three dies. The change is a 30 minute job with the roller assembly lifted out, and no hoist is needed at this press size. A die left in the press with material in the holes sets hard and has to be drilled out, which is why the press is run empty for a minute before it stops.
Four features matter at farm scale: the die sits horizontal so gravity feeds it, the rollers run on the inside of the die, the die and rollers lift out from the top, and the cutter is adjustable on the outside.
| Feature | What It Does | Why It Matters on a Farm |
|---|---|---|
| Horizontal die plate | Material falls onto the die by gravity | No forced feeder needed at 100–200 kg/h |
| Rollers running on the die face | Press meal through the holes | Even wear across the plate |
| Top access to die and rollers | Die lifts out without dismantling | A die change is 30 minutes, not a day |
| Adjustable cutter on the die face | Sets pellet length | One machine makes 6 mm and 12 mm long pellets |
| Central lubrication to roller shafts | Grease reaches the bearings | A farm with one operator keeps it running |
| Fixed die, rotating rollers | Simple drive, one gearbox | Fewer parts to fail than a ring die at this size |
Table 8: The flat die press features that matter at farm scale. The horizontal plate and the top access are what make it serviceable by one person.
The horizontal plate is the feature that separates a flat die press from a ring die press. On a ring die the material is thrown outward against a vertical ring, which needs a feeder and a distributor to keep the die evenly loaded. On a flat die the material simply falls onto the plate and the rollers sweep it into the holes, which is why the same press works at 100 kg/h without a feeding system.
The cutter is the second feature that gets used daily. It sits on the outside of the die face and is set to break the extruding rope at a length, usually two to three times the diameter. A 6 mm pellet at 12 mm long and a 6 mm pellet at 18 mm long come off the same die with a different cutter setting.
21 kW for the grinding and mixing set, and 36 kW when the pellet press is running.
| Stage | Power |
|---|---|
| Hammer mill, 3 kW | 3.0 kW |
| Batch mixer, 3 kW | 3.0 kW |
| Screw conveyor and hoppers | 1.5 kW |
| Bagging stand | 0.5 kW |
| Grinding and mixing total | 8.0 kW |
| Flat die press, 15 kW | 15.0 kW |
| Press set total | 23.0 kW |
| Connected with press | 36.0 kW |
Table 9: Connected load by stage. The mill and the press never run together on a farm set, so the running load is one block or the other.
The supply question decides the press. Kenya runs 240 V single phase and 415 V three phase at 50 Hz, and the 1.5 kW and 3 kW machines can be wound for single phase. The 15 kW press cannot, so a farm with no three phase line either brings one in or runs a diesel flat die press at 60–100 kg/h.
A 3 kW motor on a long single phase run is the other trap. A 40 m run of 2.5 mm conductor will start the motor and then drop enough voltage to make it run hot, so the cable is sized on the run length rather than on the motor rating.
About 6 m by 3 m for the mill, mixer and bagging stand, and 9 m by 3 m when the press and cooling are added.
| Layout | Footprint | Clear Height |
|---|---|---|
| Grinding and mixing only | 6 x 3 m | 2.5 m |
| With flat die press | 9 x 3 m | 3 m |
| Raw material store | 4 x 3 m | 3 m |
| Finished feed store | 4 x 3 m | 3 m |
Table 10: Floor space for a farm set at 250 kg a day. The two stores are separate because feed and grain cannot share a damp corner.
The machines sit in a row in the order the material moves, and the only dimension that changes when the press is added is the length. A farm that expects to add the press later leaves the 3 m at the bagging end rather than in the middle, because the press needs to discharge into the same bagging stand.
A twelve month warranty, a spares list priced with the quotation, remote technical support