Biochar Bamboo Charcoal Making Machine Wood Logs 1.68t 3m3

bamboo biochar making machine wood logs coconut shell charcoal bonizing Furnace for BBQ

Charcoal bonizing furnace is a kind of new air flow type bonization stove, can also be called as charcoal bonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air bonizing technology, greatly improves the bonization rate to 99%, compared with the bonization rate 80% of traditional bonization stove! Its charcoal making time is short .This kind stove is safe and easy to operate,the charcoal made from the bonizing furnace can be the material of activated bon. thus it is very famous among many industries like charcoal making industry and boiler industry.

Technical parameters

The smokeless charcoal stove is special used for wood log, jute stick and other long rod-type biomass characteristics, adopts horizontal structure, t entry and exit raw material and the advanced hot gas dry bonization process technology, using a unique bonization flue gas (volatile hydrogen material and tar, etc.) Back Burning Technology, make full use of the flue gas produced by bonization process, meet the thermal needs of bonization furnace itself, greatly increase the bonization rate, the bonization rate increased from 80% to more than 95%, and easy to operate, safety and environmental protection, high production efficiency, can save a lot of energy, is the ideal equipment for bonizing the long rod type biomass material. Combination mode of multiple devices, use bonized flue gas in tandem, can reduce fuel consumption during bonization production and improve the enterprise benefit.

Characteristics of bonization furnace for charcoal :
New type of bonization equipment, production higher than general furnace, fast speed, high bon, simple operation
With smoke purification device, can store tar, no leakage, long service life;
Suitable for wood, logs, mechanism charcoal, nut shell, bamboo, etc, different shaps biomass raw material.

Advantages of bonization furnace
a. No polution: there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again. We install a special device that can use the liquid gas as the energy to heating the bonization kiln, and it will not produce any smoke.

b. bonize time more shorter: This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can bonizing 3-4 inner stove.

c. Easy operate: One people can control 2-3set, but need the crane for help; When one inner stove have been finished bonization, use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot.