Factory Price Animal Poultry Feed Pellet Making Machine cat dog feed pellet machine
Introduction of animal feed pellet machine
The working theory of feed pellet machine is that granulation is pressed out from the die hole under the extrusion of the roller pressure, the pellets length can be conveniently adjusted, and various of additive drugs can be added in the processed feed pellets, and the surface of the processed granule is smooth and clean. The hardness is moderate and the internal ripening degree is deep. Dry in dry out, easy to seal and store, natural temperature to 70-80 degrees can kill pathogenic microorganisms and parasites, and ensure feed quality, can be used to raise rabbits, chickens, ducks, geese, fish, pigs, aquatic products, etc.
Technical Parameters of Poultry Feed Pellet Machine
Operation of Poultry Feed Pellet Machine
1: Add oil into gearbox before start.
2:Double-check the belt and the screws before operation.
3:Clean up the rest after use to prevent damage to the machine.
1, Iron or stones cannot be put into the griller.
2:Check the elasticity of the belt, and the bearing frequently. Add oil in time when it needs to.
Application of animal feed pellet machine
Animal feed pellet machine is widely used in large, medium and small aquaculture, grain and feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.
Final animal feed pellets
Pellets diameter 3-12mm is available.
One machine can produce different diameter of pellets by changing the molds.
Matters need attention
1. The new machine for the first time must be run or otherwise can't be used normally.
2. When the pellet machine is working, don't reach into the input hopper by hand. If necessary, you can use a stick to help.
3. Before the machine is turned on, you need to add a little mixture before starting. When the machine is shut down, please leave a little mixture in the machine to prevent the roller and the template idling.
4. When the machine is working, and the phenomenon of stuck happens, should immediately stop and make the roller pressed to the bolt loose, and then restart the machine.
5. Each time the work is completed, the bolt of adjusting roller must be released.
6. If the machine is used for a certain period of time or squeeze out a certain amount of pellets and the pellets are made into pieces or the pellets are broken, the template should be turned to the bottom, and 2%-4% water should be added to the mixture.
7. Please often check the belt tightness to prevent the emergence of low yield, belt slippery and so on.
8. Before starting, firstly add gear oil to the gearbox reaching to 2/3 of the horizontal axis. Pellet machine in the first use should work in low load for 40 hours or so, and then replace the gearbox gear oil, 100 hours after the regular replacement. All bearings should be regularly filled with grease.
9. Particle machine works continuously and then the motor fever reaches to 70 degrees Celsius, it is a normal phenomenon.