company news about Guillotine purchase and use law

Guillotine purchase and use law
The selection of guillotine is based on safety and security. All rotating parts of the guillotine must be installed with guards; the distance between the feed inlet and the axis of the knife shaft must not be less than 3 times the width of the feed inlet if the productivity is less than 0.4 tons/hour; not less than 450 mm if the productivity is greater than 0.4 tons/hour; automatic feeding device and overload protection device must be installed if the productivity is greater than 2.5 tons/hour. Bearing seat, knife seat bolts used must be high-strength bolts, should be added with anti-loosening device.

Pay attention to timely troubleshooting. The guillotine should be placed or fixed on a solid, horizontal foundation, run steadily and not have a large vibration; before starting the machine, make a comprehensive inspection of all parts of the machine. Before starting the machine, make a comprehensive inspection of all parts of the machine. Wrench the blade shaft of the guillotine by hand to see whether the rotation is flexible, whether there are cracks in the blade, whether the fasteners are loose, and whether the hidden problems found should be eliminated in time; observe whether the guillotine is running smoothly before operation, and confirm that it is running normally before putting it into operation; feed should be evenly fed, and if abnormalities are found, it should be stopped and cleaned up; before processing feed, remove debris from the material, and strictly prevent iron, stones and other hard objects from being fed with the material; if the phenomenon of grass blockage occurs during operation, the clutch should be disengaged and stopped immediately. If the grass is blocked during operation, the clutch should be separated and stopped immediately to solve the problem. It is strictly forbidden to open the protective cover when the machine is running; stop feeding, cut off the power supply and clean up the debris in the machine before the operation is finished.