40hp can feed wood with a diameter of up to 150mm. 40hp has hydraulic feeding system. It has two feed rollers and also has a system with a hydraulic tank and pump of its own. The hydraulic valve has three gears: forward, stop and reverse. The safety of user is secured with a patented feed stopper operated with the control handle.
Garden branches chipper machine advantages
1.The machine is movable type so you can start work at any time in any place
2.Feed roller is made of alloy steel, ensuring the durability in the feeding process. Special tooth can tightly press materials,
ensuring uniform and continuous feeding in material transport avoiding skid phenomenon.
3.High volume discharge chute. Adjustable chip deflector.
4.EASY SWIVEL DISCHARGE CHUTE--360 degrees of rotation allows you to swivel the discharge chute so that you can direct the chips
into the back of a truck or trailer without having to move the entire machine. Simply push down on the handle and swing the chute.
5.WIDE FOOTPRINT SKID TYPE SUPPORT BASE prevent the machine from sinking into the soft ground during operation
6.ADJUSTABLE CHIPPER BASE LEGS will help accommodate a larger variety of tractors.
7.The in-feed hopper on the wood chippers is horizontal and approximately table height for easy material loading.
8.The clear vinyl baffle feature protects the user from chip blow-back, while allowing the user to see what is going on in the hopper.
9.MACHINE ARE EQUIPPED WITH TWO TAILLIGHTS AND ONE GENERAL LIGHTING. You can work even at night.
10.Machines are 90% assembled on delivery
into the back of a truck or trailer without having to move the entire machine. Simply push down on the handle and swing the chute.
5.WIDE FOOTPRINT SKID TYPE SUPPORT BASE prevent the machine from sinking into the soft ground during operation
6.ADJUSTABLE CHIPPER BASE LEGS will help accommodate a larger variety of tractors.
7.The in-feed hopper on the wood chippers is horizontal and approximately table height for easy material loading.
8.The clear vinyl baffle feature protects the user from chip blow-back, while allowing the user to see what is going on in the hopper.
9.MACHINE ARE EQUIPPED WITH TWO TAILLIGHTS AND ONE GENERAL LIGHTING. You can work even at night.
10.Machines are 90% assembled on delivery