Payment & Shipping Terms:
|Name:||CE Approved Flat Die Electric Small Animal Feed Pellet Mill Machine||Power:||5.5/7.5kw|
|Color:||Green Or Customer Requried||Warranty:||1 Year|
|Raw Materials:||Corn,soybean Powder||Shaft:||Harbin|
|Application:||Making Animal Pellets||Die Material:||Alloy Steel Or Stainless Steel|
CE Approved Flat Die Electric Small Animal Feed Pellet Mill Machine
Introduction of small animal feed pellet mill
1.This flat die series animal feed pellet mill that can process a variety of different diameter feed pellets is mainly designed for Rural breeding specialized households,
Small and medium-sized feed factory and livestock farm.
2.This flat die animal feed pellet mill can adopt to different materials, ensure suppression effect. Sawdust, corn straw, compression molding takes a lot of pressure in the similar granulating equipment, then roller components is the center of the whole equipment, and adopt high quality alloy steel parts, improve the service live if the roller.
>Main features of flat die animal feed pellet mill
1) Stable performance, high output, and low consumption. Easy for maintance, low failure rate, and easy operation.
2) The whole body with strong structure,the flat die and rollers is Wear-resisting, heat-resistant
3) High molding rate, high density
4) The diameter is from 2-8mm, can make according to customers’ need.
5) The machine is made up of the speed changing box, the flat die, the rollers, lubricating system; the flat die can be the alloy steel and the stainless steel.
Widely used in family and small scale farm,the compressed feed pellet is good fooder for poultry and livestock,such as chicken,pig,cattle,sheep,rabbit etc.
1. Wide production range, we could get it to pellet from biomass we could find now such as wood
chips, pine, bamboo, peanut shell, rice husk and straw.
2. The density of the pellet could be 1100 kg/m³.
3. Please ensure the max length of the biomass material is less than the diameter of the nib. For
example, the diameter of the nib is 6mm, the diameter of sawdust could not be longer than 6mm.
4. Please make sure the moisture of the material is 10%-18%, different material, different moisture
requirement. For example, pine has got more lignose and sugar, the moisture could be lower,
opposite, the moisture should be higher.
5.Compression ratio of the nib. As the different material has different stacking density and lignose,
the nib should be adjusted to get the best molding result. We have done more experiments to get the more suitable current die specification. For general material, it should be the best , but we could
adjust the compression ratio according to the material if the customer hasgot the low production.
The spare parts:die and roller:
Die include alloy steel and stainless steel.
Roller assemble include roller wrap and main shaft etc.